VULCAN TX155
Coating type: | Top coat |
Durability: | Up To 6 Years |
Contact angle: | 115 degrees |
Thickness: | Max 5 μm |
Thermal resistance: | 600 ° C |
Chemical resistance: | 1-13 pH |
Self-healing ability: | Strong |
Expenditure: | 10-20ml per layer |
Hardness: | 10H |
Technology Used: Dark Matter Technology®
Limited adhesion of insects
Self-cleaning and oleophobic
Capacity for regeneration
Special resistance against chemicals
Deep shine and resistance against UV / UVB
VULCANTX155™ ELASTOMER MEMBRANE
Coating incorporates ultra advanced Mimetic elastomer components which offer exceptionally dense yet flexible membrane forming abilities.
THIS DARK MATTER TECHNOLOGY® REINFORCED
Top Coat offers omniphobic properties to our PX10 base coat as well the ability to self regenerate and heal from abrasions, swirls and light scratches.
PRECAUTIONS AND MAINTENANCE:
Never allow highly alkaline (ph12+) chemicals to sit or dwell on the surface for extended periods. Avoid washing/abrasion in the first 7 days. Maintain every 2-3 years with hydrotx145™ and every 3-6 months with ultra.
STACKING OPTIONS:
Px10™ base coat mandatory
Hydrotx145™ may be applied on top of.
DURABILITY:
Tested to: ASTM B117, ISO9227, ASTM D4587, ASTM D6577.
SINGLE LAYER: Up to 5 years as top coat
Dual layer: up to 6 years as top coat
Dual Layers are recommended.
Dual Layers are recommended.
Suitability:Paint systems including gloss and matte
PPF Paint protection film- self healing.
PX10™ must be applied as base coat for new generation top coated films followed by VULCANTX155™ PPS Paint protection spray Viny.
Ultimate Durability Package:
Base PX10™ – Middle VULCANTX155™
– Top – HYDROTX145™
Vulcan TX155 is great for covering surfaces in gloss, satin, or matt paint, colorless PPF foil, vinyl foil (gloss/satin/matte), plastic, metal, or carbon fiber.
Note: Vertical application only (up-down) or horizontally (left-right). Cross-application causes lapping problems on dark colors. An infrared (IR) heater can be used to speed up the crosslinking process so-called <drying> (we recommend not exceeding the temperature of 60 degrees C of the panel for 15 minutes, and in the case of used cars, not to exceed 45 degrees C for 15 minutes).
Suitability
All paint systems including gloss and matt
PPF Paint protection film- self healing
PPS Paint protection spray
Vinyl
