PX10
Coating type: | Base Coat |
Durability: | Up to 6 years |
Contact angle: | 105 Degrees |
Thickness: | Max 12 microns |
Thermal resistance: | -40 ° C + 600 ° C |
Chemical resistance: | 1-14 pH |
Self-healing ability: | None |
Hardness: | 10H |
Expenditure: | 15-20 ml per layer |
Technology Used: Dark Matter Technology®
Super underlay
Self-cleaning and oleophobic
Special resistance against chemicals
Deep shine and resistance against UV / UVB
PX10™ MICRON MEMBRANE COATING
Incorporates Ultra Advanced Mimetic Thermoset Components Which Offer Exceptionally Dense Reinforced Matrix Membrane Forming Abilities.
THIS DARK MATTER TECHNOLOGY® REINFORCED
Reinforced Super Base Offers Permanent Protection For A Multitude Of Surfaces.
PRECAUTIONS AND MAINTENANCE:
Never Allow Highly Alkaline (Ph12+) Chemicals To Sit Or Dwell On The Surface For Extended Periods. Avoid Washing/abrasion In The First 7 Days. Maintain Every 2-3 Years With Hydrotx145™ And Every 3-6 Months With Ultra.
STACKING OPTIONS:
VulcanTX155™ Top coat
HydroTx145™ Top coat.
DURABILITY:
Tested to: ASTM B117, ISO9227, ASTM D4587, ASTM D6577
SINGLE LAYER: UP TO 5 YEARS
Dual layer: up to 6 years
PX10™ + VULCANTX155™ up to 10 years
PX10™ + HYDROTX145™ up to 6 years
PX10 – reinforcing undercoat with phenomenal properties such as « armor priming » and stabilizing even the softest paints that are difficult to process. This also applies to the possibility of strengthening the gel coat used for the production of jet skis, motor boats, and yachts. PX10 is used to create thick, stable base layers that can be used to apply other Titan products. The entire coating will also gain additional smoothness, transparency, and uniform thickness. The smoothness will also facilitate the beading of water. The PX10 is suitable for automotive, aerospace, marine, etc. Is suitable for all exterior surfaces except glass and PPF protective film.
Suitability
Polycarbonate
PPS Paint protection spray
Vinyl
Plastics
Metals
